Lingua 
Applicationes:
Oleum et Gas pipeline
Calor nummulariorum
Boiler
Instrumentum industria
Pressura vas
Product material
Admisce 321 (UNS S32100) est titanium austeniticum inactum ferro inactum stabilitum cum bono resistentiae corrosioni generali. Praeclarum resistentiam habet ad corrosionem intergranulare post exposita temperaturis in chromium carbidi praecipitationis 800 - 1500°F (427 - 816°C). stannum oxidationis resistit usque ad 1500°F (816°C) et altius serpunt et pressione rupturae proprietates quam admixtiones 304 et 304L habet. Habet etiam duritiam temperaturae bonae humilitatis.
Admisceri 321H (UNS S 32109) fistula ferrea immaculata est carbonis superioris (0.04 - 0.10) versio stannum. Enucleata est ad auctam resistentiam subrepentes et ad superiores vires temperaturas supra 1000oF (537℃). Pleraque materia carbonis contentum duplicem certificationem dat.
321 admisceri ferro immaculatam fistulam calore non potest durari curatione, sed frigore operante. Officina fabricationis normae facillime iuncta et discursum esse potest.
Chemical Compositio & Mechanicae proprietates ut per ASTM A312-17
| Gradus | Chemical (%) | Mechanica Properties | ||||||||||||
| C | Mn | P | S | Si | Cr | Ni | Mo | N | Cu | Ti | TS,Min(Mpa) | YS, Min(Mpa) | Prolongatio longitudinalis, min% | |
| TP321/S32100 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | - | 0.1 | - | 5x(C N)-0.70 | ≤9.53mm,515;＞9.53mm,480 | ≤9.53mm,205; | 35 |
| TP321H/S32109 | 0.04-0.1 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 |
| 0.1 |
| 4x(C N)-0.70 | ≤9.53mm,515;＞9.53mm,480 | ≤9.53mm,205; ＞9.53mm, 170 | 35 |
-
Toko pipe/tubus productorum formae:
Recta est inconsutilis fistula cum annata et salsamentis.
Tubus plexus inconsutilem cum lucida annata et conditum.
Immaculatam ferro U fistulam.
Aliquam ferro seamless tubus cum annata et CONDITANEUS.
Tubus immaculatus inconsutilem chalybem cum anneis et politis splendentibus.
-
Toko Vestibulum vexillum Typical:
ASTM A312 TP321, ASTM A312 TP321H
ASTM A213 TP321, ASTM A213 TP321H
ASTM A269 TP321, ASTM A269 TP321H
EN10216 1.4541 EN10217-1 1.4541
| CANALIS DIMENSIONE ET TOLERATIO SECUNDUM ASTM A312/ANSI B36.10& B36.19 | ||||||||||||||
| UNCIA | DN | O.D. | Wall Crassitudo (mm) | |||||||||||
| Sch5s/5 | Sch10s | Sch10 | Sch40s | Sch40 | Sch80s | Sch80 | Sch100 | Sch120 | Sch140 | Sch160 | SchXXS | |||
| /STD | /XS | |||||||||||||
| 1/8 | 6 | 10.3 | 0.89 | 1.24 |
| 1.73 |
| 2.41 |
|
|
|
|
|
|
| 1/4 | 8 | 13.7 | 1.25 | 1.65 |
| 2.24 |
| 3.02 |
|
|
|
|
|
|
| 3/8 | 10 | 17.1 | 1.25 | 1.65 |
| 2.31 |
| 3.2 |
|
|
|
|
|
|
| 1/2 | 15 | 21.3 | 1.65 | 2.11 |
| 2.77 |
| 3.73 |
|
|
|
| 4.78 | 7.47 |
| 3/4 | 20 | 26.7 | 1.65 | 2.11 |
| 2.87 |
| 3.91 |
|
|
|
| 5.56 | 7.82 |
| 1 | 25 | 33.4 | 1.65 | 2.77 |
| 3.38 |
| 4.55 |
|
|
|
| 6.35 | 9.09 |
| 11/4 | 32 | 42.2 | 1.65 | 2.77 |
| 3.56 |
| 4.85 |
|
|
|
| 6.35 | 9.7 |
| 11/2 | 40 | 48.3 | 1.65 | 2.77 |
| 3.68 |
| 5.08 |
|
|
|
| 7.14 | 10.15 |
| 2 | 50 | 60.3 | 1.65 | 2.77 |
| 3.91 |
| 5.54 |
|
|
|
| 8.74 | 11.07 |
| 21/2 | 65 | 73 | 2.11 | 3.05 |
| 5.16 |
| 7.01 |
|
|
|
| 9.53 | 14.02 |
| 3 | 80 | 88.9 | 2.11 | 3.05 |
| 5.49 |
| 7.62 |
|
|
|
| 11.13 | 15.25 |
| 31/2 | 90 | 101.6 | 2.11 | 3.05 |
| 5.74 |
| 8.08 |
|
|
|
|
|
|
| 4 | 100 | 114.3 | 2.11 | 3.05 |
| 6.02 |
| 8.56 |
|
| 11.13 |
| 13.49 | 17.12 |
| 5 | 125 | 141.3 | 2.77 | 3.4 |
| 6.55 |
| 9.53 |
|
| 12.7 |
| 15.88 | 19.05 |
| 6 | 150 | 168.3 | 2.77 | 3.4 |
| 7.11 |
| 10.97 |
|
| 14.27 |
| 18.26 | 21.95 |
| 8 | 200 | 219.1 | 2.77 | 3.76 |
| 8.18 |
| 12.7 |
| 15.09 | 18.26 | 20.62 | 23.01 | 22.23 |
| 10 | 250 | 273.1 | 3.4 | 4.19 |
| 9.27 |
| 12.7 | 15.09 | 18.26 | 21.44 | 25.4 | 28.58 | 25.4 |
| 12 | 300 | 323.9 | 3.96 | 4.57 |
| 9.53 | 10.31 | 12.7 | 17.48 | 21.44 | 25.4 | 28.58 | 33.32 | 25.4 |
| 14 | 350 | 355.6 | 3.96 | 4.78 | 6.35 | 9.53 | 11.13 | 12.7 | 19.05 | 23.83 | 27.79 | 31.75 | 35.71 |
|
| 16 | 400 | 406.4 | 4.19 | 4.78 | 6.35 | 9.53 | 12.7 | 12.7 | 21.44 | 26.19 | 30.96 | 36.53 | 40.49 |
|
| 20 | 500 | 508 | 4.78 | 5.54 | 6.35 | 9.53 | 15.09 | 12.7 | 26.19 | 32.54 | 38.1 | 44.45 | 50.01 |
|
| 24 | 600 | 609.6 | 5.54 | 6.35 | 6.35 | 9.53 | 17.48 | 12.7 | 30.96 | 38.89 | 46.02 | 52.37 | 59.54 | |
| ASTM A312 Dimensio tolerantia inconsutilem fistulam | ||
| Signa | ASTM A312 Inconsutilem fistulam | |
| Extra Diameter (mm) | Tolerantia (mm) | |
| Extra Diameter | 10.3-48.3 | -0.80， 0.40 |
| 48.3-114.3 | -0.80， 0.80 | |
| 114.3-219.1 | -0.80， 1.60 | |
| 219.1-457.2 | -0.80， 2.40 | |
| 457-660.4 | -0.80， 3.20 | |
| 660.4-864 | -0.80， 4.00 | |
| 864-1219 | -0.80， 4.80 | |
| Crassitudo | 10.3-73 | -12.5%, 20% |
| 88.9-457.2, S/D≤5% | -12.5%, 22.5% | |
| 88.9-457, S/D＞5% | -12.5%, 15% | |
| ≥508, S/D≤5% | -12.5%, 22.5% | |
| ≥508, S/D＞5% | -12.5%, 15% | |
