Lingua 
Applicationes:
Oleum et Gas pipeline
Calor nummulariorum
Boiler
Instrumentum industria
Pressura vas
Product material
Gradus 316 est vexillum molybdenum graduum gerentem, alterum in altiore volumine productio ad 304 inter austeniticum chalybem immaculatum. Molybdaenum 316 melius altiore corrosioni-resistenti tribuit quam Gradus 304, maxime resistentia ad fovendum et rimas corrosioni in chloridi ambitibus.
Gradus 316L, versio humilis carbonis 316 et immunitatem altissimam habet a sensibilitate (grani confinium carbide praecipitationis). Late in oleo et gas et chemicis industriis adhibetur propter corrosionem sumptus efficacem resistentiam et facilitatem fabricationis. Nulla fere est pretio differentia inter 316 et 316L immaculatam ferro. Austenitica structura his gradibus etiam praestantem duritiam praebet, etiam ad temperaturae cryogenicas. Chromium-nickel austeniticum ferro immaculatum comparatum, 316L chalybs immaculata altius serpere offert, accentus rupturae et distrahendi vires ad temperaturas elevatas.
Chemical Compositio & Mechanicae proprietates ut per ASTM A312-17
| Gradus | Chemical (%) | Mechanica Properties | ||||||||||||
| C(max) | Mn (max) | P(max) | S(max) | Si (max) | Cr | Ni | Mo | N(max) | Cu(max) | Ti | TS,Min(Mpa) | YS, Min(Mpa) | Prolongatio longitudinalis, min% | |
| TP316/S31600 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | - | - | - | 515 | 205 | 35 |
| TP316L/S31603 | 0.035 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | 485 | 175 | 35 |
| TP316Ti/S31635 | 0.08 | 2.00 | 0.045 | 0.03 | 0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0.1 | - | 5x(C N)-0.70 | 515 | 205 | 35 |
-
Toko pipe/tubus productorum formae:
Recta est inconsutilis fistula cum annata et salsamentis.
Tubus plexus inconsutilem cum lucida annata et conditum.
Immaculatam ferro U fistulam.
Aliquam ferro seamless tubus cum annata et CONDITANEUS.
Tubus immaculatus inconsutilem chalybem cum anneis et politis splendentibus.
-
Toko Vestibulum vexillum Typical:
ASTM A312 TP316, ASTM A312 TP316L
ASTM A213 TP316, ASTM A213 TP316L
ASTM A269 TP316, ASTM A269 TP316L
EN10216 1.4401 EN10217-1 1.4401
| CANALIS DIMENSIONE ET TOLERATIO SECUNDUM ASTM A312/ANSI B36.10& B36.19 | ||||||||||||||
| UNCIA | DN | O.D. | Wall Crassitudo (mm) | |||||||||||
| Sch5s/5 | Sch10s | Sch10 | Sch40s | Sch40 | Sch80s | Sch80 | Sch100 | Sch120 | Sch140 | Sch160 | SchXXS | |||
| /STD | /XS | |||||||||||||
| 1/8 | 6 | 10.3 | 0.89 | 1.24 |
| 1.73 |
| 2.41 |
|
|
|
|
|
|
| 1/4 | 8 | 13.7 | 1.25 | 1.65 |
| 2.24 |
| 3.02 |
|
|
|
|
|
|
| 3/8 | 10 | 17.1 | 1.25 | 1.65 |
| 2.31 |
| 3.2 |
|
|
|
|
|
|
| 1/2 | 15 | 21.3 | 1.65 | 2.11 |
| 2.77 |
| 3.73 |
|
|
|
| 4.78 | 7.47 |
| 3/4 | 20 | 26.7 | 1.65 | 2.11 |
| 2.87 |
| 3.91 |
|
|
|
| 5.56 | 7.82 |
| 1 | 25 | 33.4 | 1.65 | 2.77 |
| 3.38 |
| 4.55 |
|
|
|
| 6.35 | 9.09 |
| 11/4 | 32 | 42.2 | 1.65 | 2.77 |
| 3.56 |
| 4.85 |
|
|
|
| 6.35 | 9.7 |
| 11/2 | 40 | 48.3 | 1.65 | 2.77 |
| 3.68 |
| 5.08 |
|
|
|
| 7.14 | 10.15 |
| 2 | 50 | 60.3 | 1.65 | 2.77 |
| 3.91 |
| 5.54 |
|
|
|
| 8.74 | 11.07 |
| 21/2 | 65 | 73 | 2.11 | 3.05 |
| 5.16 |
| 7.01 |
|
|
|
| 9.53 | 14.02 |
| 3 | 80 | 88.9 | 2.11 | 3.05 |
| 5.49 |
| 7.62 |
|
|
|
| 11.13 | 15.25 |
| 31/2 | 90 | 101.6 | 2.11 | 3.05 |
| 5.74 |
| 8.08 |
|
|
|
|
|
|
| 4 | 100 | 114.3 | 2.11 | 3.05 |
| 6.02 |
| 8.56 |
|
| 11.13 |
| 13.49 | 17.12 |
| 5 | 125 | 141.3 | 2.77 | 3.4 |
| 6.55 |
| 9.53 |
|
| 12.7 |
| 15.88 | 19.05 |
| 6 | 150 | 168.3 | 2.77 | 3.4 |
| 7.11 |
| 10.97 |
|
| 14.27 |
| 18.26 | 21.95 |
| 8 | 200 | 219.1 | 2.77 | 3.76 |
| 8.18 |
| 12.7 |
| 15.09 | 18.26 | 20.62 | 23.01 | 22.23 |
| 10 | 250 | 273.1 | 3.4 | 4.19 |
| 9.27 |
| 12.7 | 15.09 | 18.26 | 21.44 | 25.4 | 28.58 | 25.4 |
| 12 | 300 | 323.9 | 3.96 | 4.57 |
| 9.53 | 10.31 | 12.7 | 17.48 | 21.44 | 25.4 | 28.58 | 33.32 | 25.4 |
| 14 | 350 | 355.6 | 3.96 | 4.78 | 6.35 | 9.53 | 11.13 | 12.7 | 19.05 | 23.83 | 27.79 | 31.75 | 35.71 |
|
| 16 | 400 | 406.4 | 4.19 | 4.78 | 6.35 | 9.53 | 12.7 | 12.7 | 21.44 | 26.19 | 30.96 | 36.53 | 40.49 |
|
| 20 | 500 | 508 | 4.78 | 5.54 | 6.35 | 9.53 | 15.09 | 12.7 | 26.19 | 32.54 | 38.1 | 44.45 | 50.01 |
|
| 24 | 600 | 609.6 | 5.54 | 6.35 | 6.35 | 9.53 | 17.48 | 12.7 | 30.96 | 38.89 | 46.02 | 52.37 | 59.54 | |
| ASTM A312 Dimensio tolerantia inconsutilem fistulam | ||
| Signa | ASTM A312 Inconsutilem fistulam | |
| Extra Diameter (mm) | Tolerantia (mm) | |
| Extra Diameter | 10.3-48.3 | -0.80， 0.40 |
| 48.3-114.3 | -0.80， 0.80 | |
| 114.3-219.1 | -0.80， 1.60 | |
| 219.1-457.2 | -0.80， 2.40 | |
| 457-660.4 | -0.80， 3.20 | |
| 660.4-864 | -0.80， 4.00 | |
| 864-1219 | -0.80， 4.80 | |
| Crassitudo | 10.3-73 | -12.5%, 20% |
| 88.9-457.2, S/D≤5% | -12.5%, 22.5% | |
| 88.9-457, S/D＞5% | -12.5%, 15% | |
| ≥508, S/D≤5% | -12.5%, 22.5% | |
| ≥508, S/D＞5% | -12.5%, 15% | |
